Pull Pall Brackets
The next new product for 2023, we are now able to offer the first ever foof rack mount for the Pull Pall recovery device. This product was made to support the Pull Pall spade and linkage separately, so that you can choose to run 1 or both of them on your roof rack to help transport your Pull Pall. Key features include:
Mounts to any Gamiviti rack, using a combination of bolts through the rack plates, or tube clamps around the rack bar.
Mounts to any extrusion rack, using channel nuts running inside your t-slot profile extrusions
Secures the spade to your rack using the same latch mechanism that secures the spade to the linkage during a recovery operation.
Additionally secures the spade to your rack with a provided velcro strap, and options for adding a 1/4” pin and/or bolts through the spade (not included).
Secures the linkage to the rack using star knobs and carriage bolts, run through a custom made plate and L-bracket designed specifically for this application.
Additionally secures the linkage to the spade mount with an optional 5/6 trailer hitch pin (not included).
spade mount
The spade mount can be bolted directly to any Gamiviti rack plate, or to any extrusion rack or tray rack. The spade is held in place using its own attachment slots and lever, and additional security can be achieved by using optional 1/4” pins, velcro straps, even bolts & washers.
Linkage Mount
The linkage mount can be bolted directly to the cross bars, rack plates, or combination of the 2 on any Gamiviti rack. It can also be directly mounted to any extrusion rack, and if spaced correctly can interface with the spade mount using a standard 5/8” hitch pin.
video
additional information about pull pall
To inquiry about purchasing your own Pull Pall, or to ask questions about the product please contact pull pall directly https://www.pullpal.com/
